Loctite Super Glue Gel Tubes, Clear, 0.07 oz
Packaging Size Make your selection 0.07 oz
-
Superior Performance: Super glue gel creates a super-strength final bond that’s ideal for porous surfaces and vertical applications
-
Invisible Repairs: No-drip gel sets quickly and dries transparent for home, hobby, and crafting projects
-
Fast and Easy: Sets in 15 to 30 seconds with no clamping required
-
Precise Control: Twist-on cap punctures the tube so it is easy to use and provides a no-mess application
-
Versatile: Works well on porous and non-porous surfaces including leather, wood, rubber, metal, paper, ceramic, most hard plastics, and more
Loctite Super Glue Gel has proven superior performance over most ordinary superglues and adhesives, and it provides a super-strength final bond. Thanks to its thicker gel consistency, this adhesive is ideal for porous surfaces and vertical applications because it won’t drip or run. Our no-drip gel dries clear and sets in 15 to 30 seconds without clamping. Plus, it’s durable enough to resist moisture, most chemicals, and freezing temperatures. Loctite Super Glue Gel comes with a twist-on cap that punctures the tube, making it easy to use and to avoid additional mess while opening. Use our versatile Super Glue Gel to make repairs on ceramic figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals, and O-rings. It is also strong enough to bond to leather, cork, paper, wood, fabric, metal, and hard plastics such as acrylic and PVC.
Surfaces to be bonded should be close fitting, clean, dry and free from contanimants. For best results, lightly roughen smooth surfaces. Pre-fit parts to be joined.
1. In a clockwise direction, screw cap and nozzle assembly down all the way to the tube shoulder, puncturing the tube.
2. Remove the cap counter clockwise from the nozzle
3. Apply sparingly to only one side using approximately one drop per square inch of surface
4. Press surfaces together immediately
5. Hold in place 15 to 60 seconds until bond sets
6. Do not reposition parts
7. Clean tip with tissue and replace cap
After cleaning, wet any tissue used for wiping off glue and dispose of. Cured adhesive may be cut away with caution using a sharp blade, removed with acetone, or boiling water. Note: acetone may damage surfaces and is highly flammable. Test before use and follow manufacturers instructions.
-
LOC 2G 1PK SG GEL H TUBE 12 PGSDS_235495_ES_US | application/pdf
-
Loctite® Super Glue Gel No MessSDS_235495_EN_US | application/pdf
-
Loctite® Super Glue GelSDS_1399965_EN_US | application/pdf
-
LOC 2G 2PK SG GEL H TUBE 12PGSDS_1399965_ES_US | application/pdf
-
LOC 3G 2PK SG GEL H TBE 6PGSDS_2003003_ES_US | application/pdf
-
Loctite Super Glue GelSDS_2003003_EN_US | application/pdf