Loctite PL Premium Fast Grab, Gray, 10 oz
Packaging Size Make your selection 10 oz
Color Make your selection Gray
-
8X Stronger: Up to 8 times stronger than traditional construction adhesives thanks to its 100% polyurethane formula
-
Fast Grab: High initial tack holds onto objects quickly and reduces the need for bracing on vertical surfaces
-
Versatile: Weather resistant for indoor or outdoor projects and bonds to: wood, plywood, OSB, MDF, treated wood, hardwood flooring, concrete, stone, granite, marble, slate, masonry, brick, foam insulation, and more
-
Moisture curing, extended repositioning time, curing expansion
-
Low VOC: Virtually VOC free (< 2% by weight) with no solvent order and meets and exceeds state and national VOC guidelines, APA AFG-01 specs, ASTM, and HUD
Loctite PL Premium Fast Grab Polyurethane Construction Adhesive is a revolutionary construction adhesive that’s up to 8 times stronger than traditional adhesives. Loctite 8X PL is an all-purpose construction adhesive that provides superior results with a high initial tack for vertical surfaces to hold objects quickly with no bracing required. This versatile construction adhesive can be used for indoor and outdoor projects and is water resistant for work in humid areas. The long-lasting formula can also be applied directly to wet, frozen, or treated lumber and will last as long as the surface it joints together. Loctite PL Premium Fast Grab features an extended repositioning time and sets in 20 minutes and fully cures in 24 hours. Low VOC (<2% by weight), Loctite PL Premium Fast Grab has no strong solvent odors and is great for interior projects. It is VOC compliant for sale in all 50 states and meets and exceeds APA AFG-01 specs. Loctite PL Premium Fast Grab Polyurethane Construction Adhesive bonds to most common construction materials such as wood, plywood, OSB, MDF, treated wood, hardwood flooring, concrete, stone, granite, marble, slate, masonry, brick, foam insulation of all sorts including EPS (expanded polystyrene foam), XPS (extruded polystyrene foam), and polysio (urethane) foam, carpets, metal, stainless steel, galvanized metal, lead, cement-based products, fiber cement panels, ceramic, fiberglass, drywall, rigid and cellular vinyl/PVC trim and molding and polyash trim.
Step 1. Cut tip at 45° degree angle to required width opening.
Step 2. Puncture inner seal fully so that it is completely open.
Step 1.Use a caulk gun to apply to one of the surfaces being bonded.
Step 2. Press surfaces together within 15 minutes after application.
Clean tools and adhesive residue immediately with mineral spirits.
Material can only be removed mechanically once cured.